Manufacturers of the Air-Sentry Fume Hood







 

Open Bypass Fume Hoods
 
findout.GIF (1077 bytes)
Specific Features:

Bypass slots in front panel allow air to enter the hood when the sash is lowered.

Full steel superstructure with phenolic resin interior liner.

Designed and tested to ASHRAE 110-1995 standards.

Sealed fluorescent light fixture.

Plumbing access panels

All hood are 7'-6" high, sash extends above hood by amount noted.

   Optional Features:

Combination horizontal sliding and vertical rising sash.

Choice of service fixtures and controls.

Choice of liner and work surface materials.

Explosion proof design.

Air flow monitor.

See base cabinet section for base cabinet

Note: Units shown with optional cabinets

Single Sash
5.5a.gif (2948 bytes)

Low Bench
5.5b.gif (3404 bytes)
Model W D Face Opening
HBBV3  36 33.5 5.9 Sq. Ft.
HBBV4  48 33.5 8.5 Sq. Ft.
HBBV5  60 33.5 11.1 Sq. Ft

Sash extends 12 1/41" above hood top when fully open.

Sash opens 32 1/4" above work surface.
Model W D Face Opening
HLBV3  36 35.5 9.4 Sq. Ft.
HLBV4  48 35.5 13.5 Sq. Ft.
HLBV5  60 35.5 17.7 Sq. Ft.
HLBV6  72 35.5

21.9 Sq. Ft.

Sash extends 5 1/4" above hood top when fully open.

Sash opens 51 1/4" above work surface.
Base cabinet is 18" high.
Walk-In
5.5c.gif (3124 bytes)
Model W D Face Opening
HWBV3  36 35.5 12.9 Sq. Ft.
HWBV4  48 35.5 18.7 Sq. Ft.
HWBV5  60 35.5 24.4 Sq. Ft.
HWBV6 72 35.5 30.2 Sq. Ft.

Sash extends 14 3/4" above hood top when fully open.

Sash opens 69 1/4" above work surface.

 

info@lab-crafters.com | http://www.lab-crafters.com

website comments to dpb@islandguide.com