2. Leg assemblies are welded construction and attached to the table apron using frame bolts. Table legs are cut from 2" square tubular steel and provided with recessed leveling bolt.

3. Knee space frames are 1-1/2" high furnished where indicated, where maximum knee space height is desired and drawers are not required. Legs, when required, are welded to the frame.

4. Leg rails and stretchers are channel formed and welded, supplied only where indicated.

Hardware:

1. Door and drawer pulls are made from chemically resistant ABS material that mount flush with the surface. Color: black

2. Hinges are removable, heavy duty pivot type, formed from 11 ga. stainless steel with nylon bushing to allow ease of movement. Assembled hinges are concealed within the door and cabinet stile with only the pivot point exposed at the corner edge of the door. Hinges are capable of supporting a 200 pound load.

3. Door catches feature a spring actuated with a nylon roller that is self adjusting for controlled opening and closing action.

4. Locks, where shown or specified, are of heavy duty type with 14 tumblers having a minimum of 7000 primary key changes within 240 master key groups and 30 grand master keys. Two keys are provided with each lock keyed differently, and two keys for each master key group. The face of each lock is of satin finish.

5. Label holders, where shown or specified, are sized to compliment the door and drawer pulls and are black in color.

6. Shelf clips are of die formed steel, and zinc plated. Shelf clips fully engage in adjustment holes located on 1/2" centers.

Finish:

4. The final finish is a high grade, chemically resistant two-part catalytically activated polyurethane that is oven baked to insure positive