1. Drawers are available in a variety of heights and widths for efficient flexibility and storage capacities. Drawers are located on cabinets as to provide maximum functional use.

2. Bodies are of one piece construction including bottom, both sides, back and inner front. They are fully coved at the bottom interior on all four sides for easy cleaning. All top edges are formed for strength and designed to provide convenient hand holding position if drawer is removed. Fronts are of double wall construction.

3. Drawer suspension is achieved by heavy duty formed drawer tracks. Tracks are round formed raceways to allow self centering of drawer within the track. Drawers tracks utilize nylon tires wheels with ball bearing rollers. Drawer runners are welded to the draw body, and case channels are securely fastened to the case members.

4. Drawer shall lock open when in the full open position and have self closing tracks enabling them to roll into the case when extended approximately 5" in the open position. Drawers are removable without the use of tools. Drawer heads are insulated with foam insulation and feature rubber bumpers secured into pre-punched holes for cushioned closing.

5. File drawers can be furnished with a spring loaded file follower when specified.

Doors:

1. Hinged doors are 3/4" thick, double wall construction insulated with 5/8" thick honey comb material, to provide maximum rigidity and sound attenuation. All interior door surfaces are painted prior to assembly. Doors close against rubber bumpers installed in pre-punched holes.

2. Sliding doors are of double pan construction. All sliding doors have convex nylon rollers operating in a formed top hung track. Doors have flush pulls and close against mounted rubber bumpers.

3. Frameless glass sliding doors are nominal 1/4" thick sheet glass with applied pulls. Bottom edges of doors slide in an extruded aluminum track on nylon rollers. Rubber bumper stops are provided for doors in the fully open and fully closed position.

Shelves:

1. All removable shelves are adjustable in 1/2" increments. Shelves have four sides formed down 3/4", with an additional 3/4" return front and back. Shelves that are 48" and longer are provided with a full width hat channel welded at mid span.

Table Frames:

1. Table aprons are formed into a 4 1/2" high channel shape. Any drawers furnished with aprons are of the same constructions and suspension as described above.