1. All metal casework is of modern design and is
constructed in accordance with the highest standards and practices of the metal casework
industry. Our superior quality is maintained by the use of special C.N.C. machinery,
tools, dies, fixtures and the labor of skilled workmanship. This precision manufacturing
technique insures minimal tolerances while achieving the proper clearances on all doors,
drawers, openings and other moving parts.
2. All cabinets are made from completely welded assembly shells. This allows each case
to be rigid and self-supporting to allow for interchangeability or free standing use.
3. All units shall be of flush front construction. At the intersection of vertical and
horizontal case members, such as end panels, top rails, bottoms and vertical posts, all
parts shall be on the same plane, without overlap, with welded exterior corners. Cracks
and crevices will not be present. All door and drawer fronts are in the same plane as the
exterior case members. Hinged door cabinet shells shall be rabbeted on all four sides and
on the top and sides for sliding door cabinets so as to provide a dust resistant case.
4. All units feature cleanable flush interiors. All posts, reinforcing members, or
channel uprights shall be enclosed the full height and width of the unit. The bottom is of
pan construction with two ends and back formed up for easy cleaning.
5. Floor mounted cabinets feature a toe space 4" high and 3" deep with full
return, reinforcing bottom of cabinet enclosing the toe space area. Base units have die
formed and threaded gusset at each corner. Height adjusting bolts are located at each
corner. Adjusting bolts are 1/2" dia. and have a base flange area of not less than
1" square inch to prevent damage to floor.
6. All cupboard units feature removable backs. Backs are of one piece construction with
removable knock-out panels. Removable panels are flush, formed in place for rigidity and
prepared for ease of removal and replacement. Sink cabinets utilize a lowered single piece
formed back for utilities access.
